Ready-to-use antique stone glue with high performance and adhesion based on styrene acrylic resins is used for installing antique stone inside the building on the wall using a thin layer method.
Paste
White
0.02 1.86
None
It is available in 20 kg packs.
Spread the glue on the surface with a toothed spatula with a thickness of 3 mm, and if the back of the stone is patterned or uneven, apply the glue on the back of the stone with a spatula.
Install the stone by applying pressure on the surface and move it slowly in place for better adhesion while pressing.
If the surface layer of the glue dries, it should be troweled again before installing the stone.
In normal temperature and humidity conditions, the maximum running time is 20 minutes.
After installation, at least 60% of the back of the tile must be covered with glue, otherwise, a trowel with deeper grooves should be used.
Do not use at temperatures below 5 degrees Celsius.
The best temperature for glue drying is above 15 degrees Celsius.
Aryashimi’s technical department is ready to cooperate and provide services in order to provide technical advice and how to use its products correctly.
It can be used for up to 12 months if kept in the recommended conditions and in the original packaging.
It should be kept away from cold and frost and direct sunlight and at a temperature of +5 to +35 degrees Celsius.
Paying attention to the surface under the work, the level of unevenness and the type of grooves and voids behind the antique stone, about 3 to 4 kilograms of ARYASET-CP 5 are needed to cover one square meter.
The curing time for tiles installed on water absorbing sections is after 24 hours, and for non-absorbing sections or tiles with large dimensions, it takes a longer time.
Use waterproof sealants in bathrooms and sanitary facilities.
The curing time for tiles installed on water absorbing sections is after 24 hours, and for non-absorbing sections or tiles with large dimensions, it takes a longer time.
Use waterproof sealants in bathrooms and sanitary facilities.
To install antique stone, stone, absorbent and mosaic tiles up to 120 x 60 cm on wall surfaces, stone, tile, plaster, cement, concrete and…
Avoid direct and permanent contact of this substance with the skin.
As a chemical substance, protective gloves and safety glasses should be used to avoid contact with skin or eyes.
In case of accidental contact with the skin or eyes, it should be washed with plenty of water.
