• Cart

    No products in the cart.

TK 4 Latex Concrete Glue

A kind of emulsion material for making adhesive mortars on concrete surfaces, as a strong adhesive intermediary material to increase the adhesive strength and reduce the permeability of various types of tile adhesive, concrete or mortar, and repairs of concrete and cement surfaces has been produced.


  • ASTM   C 1042 ,  C1059 , C 1440 
  • BS   6319 

Physical State:




Special Weight:

0.8 ± 0.02

Chlorine Ion:


Acidity (PH):

8.5 ± 0.5

Adhesion of concrete surface and modified mortar:


Adhesion of new concrete to old:


Ability to dissolve in water before drying:

Do have

Solubility in water after drying:



It is available in 1 , 4 , 15 gallons.


The method of making construction lining mortar and universal coating

Preparation of construction mortar according to the formula: (one cup of TK4 + one or two cups of water) the mixture and solution obtained as mortar water in dry mortar ready for the formula (sand zero to 2.5 mm 15 kg + cement 5 kg) as needed be added Preparation of mortar according to the amount of work should be mixed up to one hour.
This mortar can be traditionally applied as a lining coating with a maximum thickness of 15 mm on concrete and brick surfaces.
For greater thicknesses, it is repeated with a time interval of at least 4 hours.
The above-mentioned mortars can be used for local repairs and general coating.

Technical services

Aryashimi’s technical department is ready to cooperate and provide services in order to provide technical advice and how to use its products correctly.

Storage Period

It can be used for up to 12 months if kept in the recommended conditions and in the original packaging.


It should be kept away from cold and frost and direct sunlight and at a temperature of +5 to +35 degrees Celsius.

Benefits of use

  • Increasing the adhesion strength of tile adhesives to the applied surfaces
  • Increasing the adhesion strength of mortar to old concrete without using metal grids
  • Reduction of cracking due to lack of shrinkage and proper flexibility
  • High resistance against freezing cycles of deicing salts
  • Reduced permeability and no corrosive properties
  • Increasing tensile and bending resistance and abrasion resistance
  • Mortars made with TK4 can be used for up to 30 minutes


For cement mortar, about 800 grams of TK4 should be used per square meter with a thickness of one centimeter.
300 grams of TK4 should be used for each square meter with a thickness of 3 mm.

Practical Items

  • The strength of all types of powder and paste tile adhesive
  • Making two-component powder tile adhesive
  • Preparation of mortar and coatings
  • Concrete wall and floor surfaces of various factories, warehouses, parking lots
  • Substructure for flooring
    Repair of surface damage
  • Facade construction and implementation of exposed surfaces
  • Adhesion agent in putty powder for smoothing exposed concrete surfaces and underlaying epoxy, acrylic, polyurethane paints.
  • Preparation of adhesive mortars with sand, cement and stone soil for ceramic and stone installation
  • Preparation of stone putty to fill stone pores after installation or in quarries
  • Preparation of adhesive mortar for overall smoothing of the concrete surface instead of using metal grids

Surface Preparation

The surface under the work should be removed from any pollution, grease, dust and surface decay.
Loose and porous areas should be completely removed by mechanical methods.

Reinforcement of Tile Adhesive

In order to make a two-component powder tile adhesive, for each 20 kg packet of powder tile adhesive, 4 liters of latex concrete adhesive should be added to the powder adhesive.
In order to strengthen the paste tile adhesive, depending on the weather conditions and the execution environment, 10-15% of the weight of the paste tile adhesive, latex concrete adhesive should be added..

Safety Tips

Avoid direct and permanent contact of this substance with the skin.
As a chemical substance, protective gloves and safety glasses should be used to avoid contact with skin or eyes.
In case of accidental contact with the skin or eyes, it should be washed with plenty of water.